Floor Pads
Floor Pads
Filter Found Products
This pad is designed to strip or deep scrub oors without the use of chemicals. It may be used either wet or dry. Used for repair- ing wood oor nishes and preparing for recoating.
- Excellent for repairing acrylic or urethane finishes for recoating.
- Chemical free stripping or deep scrubbing
- Sustainable stripping with no need of harsh chemicals
- Recommended for use on machines up to 350 rpm
- This pad is designed to be used wet or dry, for removal of floor finish without the use of harsh stripping chemicals.
This pad is designed for light duty clean- ing and buf ng. It will remove light scuff marks and dirt while producing a high gloss shine. For use with standard elec- tric oor machines, orbital scrubbers and automatic scrubbers. Ideal for use on machines speeds up to 800 rpm.
- Buffing pad
- For light daily cleaning and spray buffing
- Removes light scuff marks and dirt while producing high gloss shine
- Recommended for use on machines up to 800 rpm
- For light cleaning and buffing
This extra fine pad has been designed for polishing clean, dry oors. Use dry or with restorative chemicals, to produce a wet look gloss to newly nished oors. For use with standard electric oor machines, ultra high speed machines, orbital scrubbers and automatic scrubbers. Ideal for use on machines speeds up to 3000 rpm.
- Super polishing pad
- Use dry or wet for a high gloss "wet look" to newly finished floors
- Recommended for use on machines up to 3000 rpm
- Use to buff soft finishes and low traffic areas. Ideal for marble floors
- Extra fine pad for polishing clean, dry floors.
This extra fine pad has been designed for polishing clean, dry oors. Use dry or with restorative chemicals, to produce a wet look gloss to newly nished oors. For use with standard electric oor machines, ultra high speed machines, orbital scrubbers and automatic scrubbers. Ideal for use on machines speeds up to 3000 rpm.
- Super polishing pad
- Use dry or wet for a high gloss "wet look" to newly finished floors
- Recommended for use on machines up to 3000 rpm
- Use to buff soft finishes and low traffic areas. Ideal for marble floors
- Extra fine pad for polishing clean, dry floors.
Use with a neutral our cleaning solution to remove old soiled our nish layers. This product is also used to scrub soiled hard surface ours such as concrete when used with appropriate cleaning chemicals. Ideal for use on machines speeds up to 350 rpm.
- For light scrubbing or heavy duty spray cleaning
- Aggressively removes dirt and scuff marks from heavily soiled floors prior to recoating
- Recommended for use on machines up to 350 rpm
- Removes dirt and scuff marks from heavily soiled floors prior to recoating.
- For routine scrubbing.
This pad is used to burnish/polish oor nish to a high gloss. Recommended for use on soft to hard nishes. This pad has a special binder formulation that allows the pad to effectively remove black marks and restore gloss in one pass. Ideal for use on machines speeds up to 3000 rpm.
- Effective removal of blakc marks
- Ideal on soft to hard floor finishes
- Removal of black marks and restoration of gloss in one pass
- Recommended for use on machines up to 3000 rpm
- UHS burnishing pad with a special binder formulation that allows the pad to effectively remove black marks and restore gloss.
Floor Finish Applicator Bar Medium weight T-Bar floor coater that provides consistent and even coverage. Applies a thicker coat. For use on sport and commercial wood floors. 24''W, Applicator Refills (Pkg u/m = 6/cs Sold By u/m = Case)
3M™ White Super Polish Pad 4100 is used for buffing very soft finishes or for polishing soft waxes on wood floors. Removes scuffs and black heel marks and enhances floor appearance.
- Used for light cleaning to help remove soil and scuff marks with minimal dulling of finish
- Can be used to polish wood floors, spray cleaning or dry buffing soft finishes (using a rotary machine)
- Made of polyester fibers in an open textured non-woven construction
- Polishing particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
3M™ White Super Polish Pad 4100 is used for buffing very soft finishes or for polishing soft waxes on wood floors. Removes scuffs and black heel marks and enhances floor appearance.
- Used for light cleaning to help remove soil and scuff marks with minimal dulling of finish
- Can be used to polish wood floors, spray cleaning or dry buffing soft finishes (using a rotary machine)
- Made of polyester fibers in an open textured non-woven construction
- Polishing particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
3M™ White Super Polish Pad 4100 is used for buffing very soft finishes or for polishing soft waxes on wood floors. Removes scuffs and black heel marks and enhances floor appearance.
- Used for light cleaning to help remove soil and scuff marks with minimal dulling of finish
- Can be used to polish wood floors, spray cleaning or dry buffing soft finishes (using a rotary machine)
- Made of polyester fibers in an open textured non-woven construction
- Polishing particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
3M™ Blue Cleaner Pad 5300 is designed for heavy-duty scrubbing prior to recoating. Can also be used for heavy-duty spray cleaning or foam scrubbing. Removes dirt, spills and scuffs, leaving a clean surface ready for recoating.
- Heavy duty scrubbing pad for a 1 to 2 coat removal prior to recoating
- Used with detergent solution to scrub hard surface floors
- Made of nylon and polyester fibers in an open textured non-woven construction
- Abrasive particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
3M™ White Super Polish Pad 4100 is used for buffing very soft finishes or for polishing soft waxes on wood floors. Removes scuffs and black heel marks and enhances floor appearance.
- Used for light cleaning to help remove soil and scuff marks with minimal dulling of finish
- Can be used to polish wood floors, spray cleaning or dry buffing soft finishes (using a rotary machine)
- Made of polyester fibers in an open textured non-woven construction
- Polishing particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
Cleans and shines in the same step, using only a low-speed scrubber. Save costs and labor by reducing or eliminating the need to burnish. Removes black marks three times faster than traditional cleaning pads. Two-sided pad lasts longer than traditional cleaning pads. Effective on most coated and uncoated hard floors including VCT, vinyl, rubber, marble, stone, terrazzo, granite and concrete with only water or neutral cleaner.
- Cleans and shines in the same step, using only a low-speed scrubber
- Save costs and labor by reducing or eliminating the need to burnish
- Removes black marks 3 times faster than traditional cleaning pads
- Two-sided pad lasts longer than traditional cleaning pads
- Effective on most coated and uncoated hard floors including VCT, vinyl, rubber, marble, stone, terrazzo, granite, and concrete with only water or neutral cleaner
The Scotch-Brite Clean & Shine Floor Pad shines the floor as you clean with it. With repeated use, your floors gradually achieve burnish-quality results without the extra step of actually burnishing. Using a low-speed auto scrubber with just plain water or neutral cleaner, it effectively removes scuff marks faster than traditional floor pads and lasts significantly longer. They are effective on most coated and uncoated hard floors including VCT, LVT, vinyl, rubber, marble, stone, terrazzo, granite, and concrete. The pads are designed for use on both sides for ease of use and extended life. Maintain a shining reflection with less time, effort, and equipment. Scotch-Brite Clean & Shine Floor Pads are certified by Green Seal for Environmental Innovation.
The new and improved Doodle Scrub Blue Tile & Grout Pad is designed for deeper scrubbing of tile and grout surfaces. The integrated Velcro backing extends the pad life and minimizes slippage between the pad and the machine. No driver pad is required.
3M™ Blue Cleaner Pad 5300 is designed for heavy-duty scrubbing prior to recoating. Can also be used for heavy-duty spray cleaning or foam scrubbing. Removes dirt, spills and scuffs, leaving a clean surface ready for recoating.
- Heavy duty scrubbing pad for a 1 to 2 coat removal prior to recoating
- Used with detergent solution to scrub hard surface floors
- Made of nylon and polyester fibers in an open textured non-woven construction
- Abrasive particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive
APPLICATOR REFILLS Refill pads for T-Bar applicators. Use with water-based and OMU coatings
This pad is used to burnish/polish oor nish to a high gloss. Recommended for use on soft to medium nishes. Ideal for use on machines speeds up to 3000 rpm.
- Blended polyester and light natural fibers
- Recommended use on soft to medium finishes
- Extra high gloss when buffing or burnishing
- Recommended for use on machines up to 3000 rpm
- Blended polyester and natural fibers for an extra high gloss when buffing or burnishing with an ultra high speed machine
Use with water based our stripping solution to remove worn and soiled our nishes or sealers. May also used to clean heavily soiled hard surface ours, such as concrete, when used with proper cleaning solutions. For use on standard electric our machines or automatic scrubbers. Ideal for use on machines speeds up to 350 rpm.
- Wet stripping applications
- Aggressive removal of dirt and old finish buildup
- Recommended for use on machines up to 350 rpm
- Cleans down to the original surface.
- Very aggressive stripping pad
Sand Screen Discs are commonly used for removal or repair of coatings on wood oor surfaces. An ideal application would be refurnishing gym floors. They are also used for repair of painted floor surfaces. Use both sides of the Sand Screen Disc. May be used either wet or dry. Use a screen driver pad to prevent screen slippage and to maximize performance. Use with conventional or oscillating floor machines.
- Aggressive removal and repair disc
- Commonly used for coating repair on wood, gym, or painted floor surfaces
- Use both sides of the sand screen disc
- Use wet or dry on wood floors
- Sand Screen Discs are commonly used for removal or repair of coatings on wood floor surfaces.